Product Search

 

Product Range

Variable speed Drives, AC and DC Motors — Ex-Ed can supply you with a full range of control systems, installation options and services.

Modules

< Previous12Next >

Option Modules
Parker SSD: Operator station / Keypad | Remote mounting From £21.00

Parker SSD: Operator station / Keypad

Remote mounting operator station / keypad, cable and mounting kits for Parker SSD Drives AC Inverters and the 590P DC Drives.

The operator station / keypad for the Parker SSD Drives 650V and 690 AC inverter can be mounted on the drive or remotely with the remote operator station mounting kit.

The operator station / keypad for the Parker SSD Drives 650 can only be mounted remotely if the RS232 (P3) port is fitted to the drive.

More Information

Brake Switches
Parker SSD: 650V | Internal Brake Switch From £57.00

Sorry no image available

The dynamic brake option is an additional pcb, fitted inside the Parker SSD Drives 650V inverter

More Information

Option Modules
Parker SSD: RS 422 / RS485 | Including EI Bisync and Modbus RTU From £76.00

Parker SSD: RS 422 / RS485

The RS485 / RS422 Communications Interface provides a serial data port, allowing variable speed drives to be linked to form a network.

The RS485 / RS422 Communications Interface supports EI Bisynch ASCII only, not Binary.

The RS485 / RS422 module plugs into the right-hand position on the front of the Parker SSD Drives 690 inverter. For the Parker SSD Drives 690 frame B and the Parker SSD Drives 650 / 650V frame size 1, 2 and 3 it plugs onto the front of the drive replacing the operator station. It can be used with the Operator Station fitted on these inverters, but the Operator Station must be mounted remotely using the correct Panel Mounting Kit with connecting lead.

More Information

Option Modules
Parker SSD: Cloning Module | From £85.00

Parker SSD: Cloning Module

For use with the Parker SSD Drives 650 and 650V AC Inverters.

The Parker SSD Drives 6514 cloning module allows easy back-up and transfer of parameters between different inverters.

Up to 10 different drive set-ups stored in each module.

Can reduce Inverter configuration, set-up and commissioning time.

More Information

Encoder Feedback Options
Parker SSD: HTTL Encoder Feedback Board | From £101.00

Parker SSD: HTTL Encoder Feedback Board

The HTTL Speed Feedback option allows incremental encoders to be connected directly to the motor controller to provide highly accurate speed feedback measurement.

For use with Parker SSD Drives 690P AC Inverters frame size B.

More Information

Encoder Feedback Options
Parker SSD: HTTL Encoder Feedback Technology Box | From £101.00

Parker SSD: HTTL Encoder Feedback Technology Box

The HTTL Speed Feedback Option allows incremental encoders to be connected directly to the motor controller to provide highly accurate speed feedback measurement.

For use with Parker SSD Drives 690P AC Inverter frame sizes C - J.

 

 

More Information

Option Modules
Parker SSD: Profibus Comms Module | From £103.00

Parker SSD: Profibus Comms Module

The Profibus communication modules support the Profibus-DP variant of the Profibus protocol.

Profibus-DP is a multimaster, master-slave, token passing network.

The Profibus module plugs into the right-hand option slot on the front of the Parker SSD Drives 590 DC Drive and the Parker SSD Drives 690 AC inverter frame sizes C - F. 

For the Parker SSD Drives 690 frame size B and the Parker SSD Drives 650 / 650V frame size 1, 2 and 3 it plugs onto the front of the drive replacing the operator station.  It can be used with the Operator Station fitted on these drives, but the Operator Station must be mounted remotely using the correct Panel Mounting Kit with connecting lead.

More Information

Option Modules
Parker SSD: CAN Comms Technology Box | From £217.00

Parker SSD: CAN Comms Technology Box

CANopen is a vendor independent, open fieldbus standard for a wide range of applications in manufacturing, process and building automation.

The CAN comms module plugs into the right-hand option slot on the front of the Parker SSD Drives 590 DC Drive and the Parker SSD Drives 690 AC inverter, frame sizes C - F.

For the Parker SSD Drives 690 frame size B and the Parker SSD Drives 650 / 650V frame size 1, 2 and 3 it plugs onto the front of the drive replacing the Operator Station.

It can be used with the Operator Station fitted on these DC drives and AC inverters, but the Operator Station must be mounted remotely using the Panel Mounting Kit with connecting lead.

 

More Information

Option Modules
Parker SSD: DeviceNet Comms Technology Box | From £217.00

Parker SSD: DeviceNet Comms Technology Box

DeviceNet is a vendor independent, open fieldbus standard for a wide range of applications in manufacturing, process and building automation.

DeviceNet is a multimaster, multislave network and supports both master - slave and peer to peer communications.

The DeviceNet module plugs into the right-hand position on the front of the Parker SSD Drives 590 DC Drive and the Parker SSD Drives 690 AC inverter frame sizes C - F. 

For the Parker SSD Drives 690 inverter, frame size B and the Parker SSD Drives 650 / 650V inverter, frame size 1, 2 and 3 it plugs onto the front of the drive replacing the operator station.  It can be used with the Operator Station fitted on these drives, but the Operator Station must be mounted remotely using the correct Panel Mounting Kit with connecting lead.

More Information

< Previous12Next >

Ex-Ed Drives and Controls | 13 Granby Road, , Hinckley, Leicestershire, LE10 0PW | Telelphone: 01455 450776 | Email: info@exeddrivesandcontrols.co.uk

Website Design and Development by ID-A Design Ltd