Product Search

 

Product Range

Variable speed Drives, AC and DC Motors — Ex-Ed can supply you with a full range of control systems, installation options and services.

Ancillary Components

< Previous12Next >

Semiconductor Fuses
Parker SSD: 6.3 x 32mm | Barrel Type From £2.00

Parker SSD: 6.3 x 32mm

Main AC Semiconductor supply fuse suitable for use with the Parker SSD 506, 507 and 508 single phase DC Drives.

More Information

Semiconductor Fuses
Sprint-Electric: Fuse Holder | Single Pole From £2.00

Sprint-Electric: Fuse Holder

Single pole fuse holder and disconnector suitable for the recommended semiconductor AC supply fuse for all single phase Sprint Electric DC Drives and three phase Sprint Electric DC Drives rated up to 65kW.

Two semiconductor fuses and two fuseholders required for line to line operation.

Three semiconductor fuses and three fuseholders required for three phase DC drives.

Also suitable for the recommended auxillary semiconductor fuses for all Sprint Electric three phase DC drives.

More Information

Semiconductor Fuses
Sprint-Electric: 6.3 x 32mm | Barrel Type From £3.00

Sprint-Electric: 6.3 x 32mm

Main AC Semiconductor supply fuse suitable for use with all single phase Sprint Electric DC Drives rated at 1.8KW (12.2) Amps and lower.  Two fuses and two fuse holders required for line to line operation.

Three fuses and three fuse holders required for the three phase, Sprint Electric SL / SLX5 analogue drive and the Sprint Electric PL / PLX5 digital drive. 

Auxilliary semiconductor fuse suitable for the Sprint Electric SLE, SL and SLX analogue DC Drive and the PL / PLX Digital DC Drive rated up to 145KW.  Three fuses and three fuse holders required.

More Information

Semiconductor Fuses
Parker SSD: 14 x 51mm | Ferrule Type From £6.00

Parker SSD: 14 x 51mm

Main AC Semiconductor Supply fuse suitable for use with the Parker SSD Drives 512C and 514C DC Drives. 

Also with the now obselete SSD Drives 512 and Eurotherm Drives 512.

Two fuses and two fuse holders required for 415V Line to Line operation.

 

 

More Information

Semiconductor Fuses
Sprint-Electric: 14 x 51mm | Ferrule Type From £7.00

Sprint-Electric: 14 x 51mm

Main AC Semiconductor supply fuse suitable for use with the Sprint Electric 1600i, 3200i/16 and 3600XRi single phase DC Drives.  For 415V Line to Line operation, two fuses and two fuse holders required.

Three fuses and three fuse holders required for the three phase, Sprint Electric SLE 14, SL / SLX10, SL / SLX15  analogue drive and the Sprint Electric PL / PLX 10 and PL / PLX15 digital drive. 

 

More Information

Semiconductor Fuses
Parker SSD: Single Phase Fuse Kit | 506 / 507 / 508 / 512C / 514C From £10.00

Parker SSD: Single Phase Fuse Kit

The single phase fuse kit contains one semiconductor fuse and one fuse holder.

For use with the Parker SSD Drives (Formerly Eurotherm Drives) 506 / 507 / 508 / 512C and 514C single phase DC Drives.

Also the SSD Drives 512 and Eurotherm Drives 512.

Two fuse kits required for 415V Line to Line operation.

More Information

Semiconductor Fuses
Parker SSD: Fuse Holder | Single Pole From £11.00

Parker SSD: Fuse Holder

Single pole fuse holder and disconnector suitable for use with the recommended semiconductor AC supply fuse for all Parker SSD single phase DC drives.

Two semiconductor fuses and two fuseholders required for 415 volt line to line operation of the Parker SSD Drives 512C and 514C DC Drives.

 

More Information

Dynamic Braking
Parker SSD: Brake Resistors | 650 / 650V / 690 From £14.00

Parker SSD: Brake Resistors

During deceleration, or with an over hauling load, the motor acts as a generator. Energy flows back from the motor into the dc link capacitors within the drive, causing their voltage to rise. If this voltage exceeds a maximum value, the drive will trip to protect the capacitors and internal power devices.  To increase the drive’s dynamic braking capability, high power resistor(s), connected across the dc link, allow the dissipation of this excess energy for short term stopping or braking.

More Information

Semiconductor Fuses
Parker SSD: Square body | Blade type From £15.00

Parker SSD: Square body

Main AC Semiconductor Supply fuse suitable for use with the Parker SSD 590P and 591P three phase DC Drive.

Also the SSD Drives 590A, 590D, 591D and Eurotherm Drives 590A, 590D and 591D

Three fuses required for each DC Drive.

Six fuses required for the 1580Amp 590P and 591P.

More Information

Semiconductor Fuses
Sprint-Electric: NH Fuse base and covers | 3 Pole panel mounting From £16.00

Sprint-Electric: NH Fuse base and covers

NH Fuse base with two piece shock protection cover to ensure safe connection of cables.

Panel mounting with screw terminals top and bottom.

More Information

< Previous12Next >

Ex-Ed Drives and Controls | 13 Granby Road, , Hinckley, Leicestershire, LE10 0PW | Telelphone: 01455 450776 | Email: info@exeddrivesandcontrols.co.uk

Website Design and Development by ID-A Design Ltd